6.19.2008

BIN and CUE Files

Thursday, June 19, 2008 by Mr PenyuBiru ·
Labels:

Anda pernah download file BIN dan CUE files?

Tahukah anda apa makna semua tu?

Untuk makluman fail tersebut adalah fail CD image. bukan gambar CD, fail CD image ialah fail yang sudah diimagekan untuk di "burn" ke CD. Ia mungkin terdiri dari data files, VCD, SVCD dan etc.

Bagaimana hendak menggunakannya?

ikuti artikel dibawah..

Burning BIN/CUE Images with Nero Burning Rom


BIN/CUE image format is quite common on the Internet. It might seem that finding an appropriate software for burning these images is quite hard. Luckily, it's not. In addition to Golden Hawk CDRWin, the original software for BIN/CUE format, you can also use Nero Burning Rom to burn the images.

Please make sure that you have the latest version of Nero (at least 5.5.8.2) before proceeding.



Verify the CUE-sheet and open it with Nero


Before doing anything else you have to verify that the path in the CUE-sheet is correct. A CUE-sheet is a plaintext file describing the structure and the location of the BIN-file. You can open up the .CUE -file using, for example, Notepad.

The file should look something like this:
FILE "IMAGE.BIN" BINARY

TRACK 01 MODE1/2352

INDEX 01 00:00:00


Usually the CUE-filename and the BIN-filename have the same body -- e.g. IMAGE. All you need to do is verify that there is no path information on the
FILE "IMAGE.BIN" BINARY
-line. Ie. it should not read e.g.
FILE "C:\TEMP\IMAGE.BIN" BINARY
If there is any path information on the line, just remove it so that you have just the name of the .BIN-file as in the example above. Also make sure that the name of the .BIN in the CUE-sheet is the same as the actual .BIN file you have on hard-disk.

Next load Nero Burning Rom and choose File, Burn Image....



Load the CUE-sheet in Nero


Choose the Files of Type: dropdown menu and select All Files *.*. Next just locate the .CUE file, select it and click Open. Make sure you select the .CUE -file, not the .BIN -file.


Burn the image


All you have to do then is choose the writing speed, select the Disc-At-Once Write Method, and click Write.

That's it! After a couple of minutes you'll have a CD with the BIN/CUE Image written on it.

Notice! Nero is not capable of handling all kinds of BIN/CUE Images. If you have problems using Nero for your image file, you should take a look at CDRWin instead.



source : http://www.afterdawn.com/guides/archive/bin_cue_with_nero.cfm


Selamat Mencuba!

0 comments:

Jangan lupa "Follow"

Jangan Lupa "Like"

Popular Minggu Ini

Entri Santai Terkini

Arkib

Menarik Tertarik